RemoteFM1for Move remotefm1.com

NEWFM-1 firmwares × Ableton Move

Your Move, playing FM-1 firmwares.

The M-VAVE FM-1 has a whole library of community firmwares: synths, samplers, sequencers. RemoteFM1 runs them off the FM-1, and now an Ableton Move can play them: running on the Move itself, or with the Move as the controller for your computer or phone.

New to all of it? Start at the words: a minute, and the rest reads easily.

3firmwares at once
—bundled: with the release
0computers needed to play

01

Two ways to use a Move with an FM-1 firmware

Both use the Move's pads, knobs and screen. The difference is where the firmware runs, and so where the sound comes out.

RemoteFM1 on the Move

The firmware runs on the Move itself: three at once, mixed, with your Schwung effects. No computer once it is set up. A phone shows the FM-1's screen.

Plays on its own
Setup effort
Records into a DAW
  • Runs onthe Move
  • Sound fromthe Move's speaker and outputs
  • On the MoveSchwung + the tool RemoteFM1
  • Linknone needed; a phone page over Wi-Fi
  • FM-1 needed?No; one can be its panel (USB-A or Wi-Fi)

Best for: a standalone instrument, playing out, the FM-1 as a wireless panel.

Set up Route B

The Move as a controller

The firmware runs on your computer, phone or tablet (remotefm1.com, the iOS or Android app). The Move is its keyboard, knobs and second screen.

Plays on its own
Setup effort
Records into a DAW
  • Runs onyour browser or the app
  • Sound fromthe computer or phone (or an FM-1 on it)
  • On the MoveSchwung + the tool Move Remote
  • LinkWi-Fi, or a USB-C cable to the computer
  • FM-1 needed?No

Best for: recording into your DAW, trying it with nothing to flash.

Set up Route A

Three taps

1/3

Where should the sound come out?

02

How it works

Every FM-1 firmware here is an .rfm1 file: the firmware's own code, built to run anywhere RemoteFM1 runs. It sees the FM-1's keys, knobs, screen and LEDs, whichever device is really playing them. Tap anything in the picture.

What the Move's controls do

Both routes share one controller core, so the Move plays the same way in each. Press a control.

Control

Pick any pad, knob or button

The screen shows the firmware that plays, here ChoralRoot. The track buttons on the left switch modes: FM-1, MIDI, Control and Sequencer. In FM-1 mode the pads are the FM-1's 27 keys.

FM-1 MODE

03

The words, for newcomers

Eight names come up again and again. Here is each in a line.

FM-1the little synth

M-VAVE's pocket FM synth: 27 keys, a colour screen, seven knobs, a Wi-Fi and Bluetooth radio, and an updater that takes community firmwares. Here it is optional: a panel you can hold.

Ableton Movethe pad instrument

Ableton's standalone instrument: 32 pads that light, eight knobs, a jog wheel, a small screen, a speaker and Wi-Fi. A small Linux computer inside, which is what makes Route B possible.

Schwungtools for the Move

An independent, open-source add-on for the Move (schwung.dev). It adds a Tools menu and a module manager; Move's own software keeps working beside it. Not made, approved or supported by Ableton.

Schwung Managermove.local:7700

Schwung's web page on the Move. You install tools such as Move Remote and RemoteFM1 there, from a browser on the same Wi-Fi.

RemoteFM1the player and the firmware

Two halves. The player (remotefm1.com, the iOS and Android apps, FM1VST in a DAW) runs FM-1 firmwares. The RemoteFM1 firmware, flashed on an FM-1, makes the FM-1 a panel for a player: over USB, Bluetooth or Wi-Fi.

RemoteFM1 on the MoveRoute B's tool

The player as a Schwung tool named RemoteFM1: the firmwares built for the Move's processor, its page at remotefm1.local:7730, three slots, your Schwung effects. Its source is the RemoteFM14Move project.

Move RemoteRoute A's tool

A Schwung tool that turns the whole Move into a remote surface: its pads, knobs and screen go to an app over Wi-Fi or USB-C. RemoteFM1 is one such app (source).

.rfm1 and the catalogthe firmwares

An .rfm1 file is one FM-1 firmware, packed to run in RemoteFM1. The catalog lists every one the authors have published, with its licence and source; the Move downloads them from a signed list, checked file by file.

04

Set it up, step by step

Tick each step as you go; this browser remembers where you are. Each step ends with a checkpoint: what you should see before going on.

0/7

You need: the Move on Wi-Fi, a computer for Schwung's installer once, and a phone for the page.

  1. Back up your Sets and samples first. Get Schwung's desktop installer from schwung.dev (Mac, Windows or Linux; the Move and the computer on the same Wi-Fi) and follow it.

    CheckpointOn the Move, Shift + Step 13 opens Schwung's Tools menu (or Shift + touch Volume + Step 13, by your Schwung shortcut setting).

  2. On the computer, open move.local:7700 (Schwung Manager) › Modules › Install Custom Module › From GitHub URL › Quixotic7/remoteFM14Move › Install from GitHub.

    CheckpointRemoteFM1 is in the Tools menu.

  3. Shift + Step 13 › turn the jog wheel to RemoteFM1 › press it. Move's own software stops while it runs. The first launch unpacks the bundled firmwares before the first sound.

    CheckpointThe Move's screen shows the firmware and the page's address; the pads light as keys.

  4. On the same Wi-Fi: remotefm1.local:7730 (or move.local:7730; on Android, the address on the Move's screen). The FM-1's screen and faceplate, served by the Move itself.

    CheckpointThe page's screen moves when you turn a knob on the Move.

  5. Shift + Step 1 opens the projects view: three slots. Mute there opens the catalog; a jog press downloads. Or the page's Browse all. Downloads need the Move on Wi-Fi once.

    CheckpointA downloaded firmware loads into a slot and plays.

  6. Cable: an FM-1 with RemoteFM1 0.3 or later, into the Move's USB-A port. No cable: flash the Wi-Fi build, then put it on your Wi-Fi.

    CheckpointThe page's pill reads "FM-1 · USB-A" or "FM-1 · Wi-Fi", and the FM-1 shows the firmware.

  7. Hold Shift, touch the volume knob and click the jog wheel. Your projects and states are kept.

    CheckpointMove's own software is back.

05

Put RemoteFM1 on your FM-1

Only if you want the FM-1 in the picture. RemoteFM1 comes in three builds, because the FM-1's memory fits one radio at a time. For a wireless FM-1 on the Move, it's the Wi-Fi build.

Wi-Fi

for RemoteFM1 on the Move

The FM-1 joins your 2.4 GHz Wi-Fi and the Move finds it: a wireless panel for Route B. No Bluetooth, and no sound out of the FM-1 in this build.

The flasher below installs this one

USB + Bluetooth

remotefm1.com, the apps, FM1VST

The everyday build, and the one for Route A or an FM-1 on the Move's USB-A cable.

remotefm1.com/installer (its default)

USB only

a cable, no radio at all

For studios that want no radio. Works wherever a cable reaches, the Move's USB-A included.

remotefm1.com/installer

06

Put the FM-1 on your Wi-Fi

Once, with the Wi-Fi build on it. The FM-1 keeps six networks and rejoins on its own. 2.4 GHz only: on an iPhone hotspot, turn on Maximise Compatibility.

  1. HOME held
    opens the settings
  2. SELECT to WI-FI
    the last row
  3. OCT+
    the networks around
  4. SELECT + OCT+
    pick yours
  5. type on the keys
    FX / SEL / ENV / LFO: abc, ABC, 123, #+=
  6. OCT+
    join: a check, the name, the address

07

When something's off

remotefm1.local doesn't open

Use move.local:7730, or the address on the Move's screen. Android's browser often can't resolve .local names. The phone must be on the same Wi-Fi as the Move (not a guest network).

The player can't reach the Move (Route A)

Is Move Remote running (its addresses on the screen)? In Chrome, allow "local network devices" when asked. On a Mac, System Settings › Privacy & Security › Local Network › your browser or app on. A USB-C cable to the computer is the fastest and surest link.

The Wi-Fi FM-1 isn't found by the Move

Both must be on the same network, and some routers keep devices from seeing each other ("client isolation"). 2.4 GHz only. The FM-1's settings › WI-FI row shows its state and address. A USB-A cable always works.

Which FM-1 firmware do I need for Route A?

None: Route A doesn't need an FM-1. If you want one as well, the USB + Bluetooth build.

Can I go back?

Yes. remotefm1.com/installer puts the USB + Bluetooth build back over the Wi-Fi one, or M-VAVE's V15. On the Move, Schwung's installer uninstalls Schwung; your Sets stay.

Is this made by Ableton or M-VAVE?

No. RemoteFM1, Move Remote and Schwung are independent, open-source projects, not approved, endorsed or supported by Ableton or M-VAVE.